features rohs-compliant threading allows st styled port components to be panel mounted compatible with all current makes of st multimode connectors mechanical dimensions are compliant with mil-std- 83522/13 HFBR-0400TZ threaded st port option for low cost miniature link components data sheet description low cost miniature link components with the threaded st port option come with 0.2 inch (5.1 mm) of 3/8-32 unef-2a threads on the port. this option is available with all hfbr-0400z, st styled port components. components with this option retain the same superior electrical/optical and mechanical performance as that of the base hfbr- 0400z components. refer to the hfbr-0400z data sheets for more information on electrical/optical performance and the hfbr-0400z reliability data sheet for more infor- mation on mechanical durability. panel mounting low cost miniature link components with the threaded st port option are suitable for panel mounting to chassis walls. the maximum wall thickness possible when using nuts and washers from the hfbr-4411z kit is 0.11 inch (2.8 mm). pin no. 1 indicator 8 1 3 5 2 4 6 7 yyww hfbr-x4xxtz 12.7 (0.50) 27.2 (1.07) 5.1 (0.20) 12.7 (0.50) 7.1 (0.28) 2.54 (0.10) 3.81 (0.15) dia. 3/8 - 32 unef - 2a threading pins 1, 4, 5, 8 0.51 x 0.38 (0.020 x 0.015) pins 2, 3, 6, 7 0.46 (0.018) dia. 2.54 (0.10) 6.35 (0.25) 8.4 (0.33) 7.6 (0.30) 5.1 (0.20) 10.2 (0.40) 3.60 (0.14) 1.27 (0.05) package outline (housed product)
package outline (port product) figure 2. recommended cut-out for panel mounting. figure 1. hfbr-4411z mechanical dimensions. 18.5 (0.73) 5.1 (0.20) 13.2 (0.52) 7.1 (0.28) 9.1 (0.36) 4.1 (0.16) dia. 3/8 - 32 unef - 2a threading 8.4 (0.33) 7.6 (0.30) across thread flats 2.0 (0.08) 7.1 (0.28) dia. yy ww date code 7.1 (0.28) 12 43 8.6 (0.34) dia. 0.46 (0.018) dia. 2.5 (0.10) dia. pin circle all dimensions in millimeters and (inches). 9.80 (0.386) dia. 8.0 (0.315) all dimensions in millimeters and (inches). 14.27 (0.563) 9.53 (0.375) dia. internal tooth lock washer 12.70 (0.50) dia. 3/8 - 32 unef - 2a thread 1.65 (0.065) typ. dia. 10.41 (0.410) max. dia. all dimensions in millimeters and (inches). the hfbr-4411z kit consists of 100 nuts and 100 washers with dimen- sions as shown in figure 1. these kits are available from avago or any authorized distributor. any stan- dard size nut and washer will work, provided the total thickness of the wall, nut, and washer does not exceed 0.2 inch (5.1mm). when preparing the chassis wall for panel mounting, use the mounting template in figure 2. when tighten- ing the nut, torque should not exceed 0.8 n-m (8.0 in-lb). ordering information to order the threaded st port option with a particular compo- nent, place a t after the base part number. for example, to order an hfbr-2416z with this option, order an hfbr-2416tz. this option is available with the following part numbers: hfbr-1412z hfbr-1414z hfbr-1415z hfbr-2412z hfbr-2414z hfbr-2416z for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries . data subject to change. copyright ? 2007 avago technologies limited. all rights reserved. 5989-4628en october 16, 2007
|
